MistBuster 850 Mist Collector Air Cleaner

The MistBuster^® 850 five-stage mist collection and air filtration system features the patented Advantage™ electronic collector cell and one or two high-efficiency electronic collector cells. The electronic collector cells provide a collection efficiency up to 99.4% on all submicron particles. An optional fifth-stage HEPA filter offers filtration efficiency up to 99.97%. Airflow is variable and controllable up to 850 CFM. Easily switch between water-soluble or oil-based machine tool coolants using Air Quality Engineering, Inc.’s patented variable voltage coolant selector A variety of mounting options are available allowing maximum versatility.

Process Applications:

• Metal machining
• Grinding & polishing
• EDM machining

Specifications

• Airflow: Variable up to 850 CFM
• Cabinet: 16-gauge carbon steel, powder coated chemical resistant baked enamel
• Input Power:
  • 115 VAC, 1-ph, 2.5A
  • 240 VAC, 1-ph, 1.25A
  • 460 VAC, 1-ph, 0.63A (connects to 2 legs of 460VAC 3-ph)
• Efficiency: Ultimate efficiency up to 99.4% on all submicron particles as measured by independent lab test in accordance with ASHRAE standard 52.2 at 750 CFM
• Filtration Stages:
  • 1st Stage: 4″ aluminum mesh impinger
  • 2nd Stage: AQE Advantage™ electronic cell (long life)
  • 3rd Stage: MistBuster^® electronic cell (high efficiency)
  • 4th Stage: Optional MistBuster^® electronic cell (high efficiency)
  • 5th Stage: Optional HEPA filter 99.97% efficiency, ESF filter, or carbon module

Dimensions:

• Cabinet 27.10″ L x 14.00″ W x 27.47″ H
• Inlet Opening: 16.62″ x 9.08″
• 99 lbs. installed weight, 111 lbs. shipping weight with 2 cells
• 113 lbs. installed weight, 125 lbs. shipping weight with 3 cells

Features:

• Two energy-efficient, self-regulating, dual-voltage, solid-state power supplies
• Patented water/oil coolant selector for a wider range ofapplication compatibility
• Patented electronic cell design that helps decrease service intervals
• ErP-compliant, backward-curved, vibration-free, direct drive motorized impeller rated at 850 CFM @ 1.1″ w.g. provides energy-efficient operation and increased performance to save on operating costs while performing well with increased airflow resistance from post filter or long duct lengths
• Ten-foot power cord with molded plug
• Quick-release, quarter-turn fasteners for fast, easy side-panel electrical compartment access reduces service and repair time
• Door and gasket profile increases door-to-seal contact to prevent leakage and pooling of coolant inside of door
• Door-latch spacers prevent over-compression of the gasket and increase gasket life

Options:

• Machine mounting kit ($350)
• Ceiling Mount Kit ($150)
• Wall Mount Kit ($150)
• Plenum Diffuser ($350)
• HEPA Post-Filter ($350)
• ESF Post-Filter ($350)
• Input Power to 240 VAC or 460 VAC ($350)